ilker.tari@isikun.edu.tr
Professor Dr. İlker Tari
Faculty of Engineering and Natural Sciences
Mechanical Engineering Lecturer
Full TımeEducation
1983-1987, Lisans
Hacettepe Üniversitesi, Mühendislik Fakültesi/ Nükleer Enerji Mühendisliği Bölümü/ Nükleer Enerji Mühendisliği Pr. (i̇ngilizce)
1994-1998, Doktora
Northeastern University, Makine Mühendisliği
1991-1994, Yüksek Lisans
Massachusetts Institute Of Technology, Nükleer Mühendislik
1990-1991, Yüksek Lisans
University Of Michigan, Nükleer Mühendislik
Work Areas
Mühendislik Temel Alanı
Makine Mühendisliği
Yenilenebilir Enerji Sistemleri
Articles
Numerical Analysis of Phase Change Material Characteristics Used in a Thermal Energy Storage Device
Impacts of inhomogeneous clamping force on local performance and liquid water formation in polymer electrolyte fuel cells
PEM fuel cell degradation effects on the performance of a stand-alone solar energy system
Publications
Exergy for A Better Environment and Improved Sustainability 1
Proceedings
Solar Hybridization Paths for Cement Production Processes
CHT Modeling of an Electronics Cabinet Using Multi-scale Meshing
NOVEL SOLAR DRYER FOR OLIVE MILL WASTEWATER
Modeling of Alumina Production for Identification of Solar Hybridization Paths
Potential of Concentrated Solar Thermal Energy for Industrial Applications
Development of view factor correlations for modeling thermal radiation in solid particle solar receivers using CFD-DEM
Development of View Factor Correlations for Modeling Thermal Radiation in Solid Particle Solar Receivers Using CFD-DEM
Micro-channel Cold Plate Dimensional Precision Effects on Performance
Numerical Investigation of Thermal Storage Performance of a Fluidized Sand Bed
Experimental Spray Cooling Studies with FC-72 and FC-84 to Comprehend the Validity of Volumetric Flux Model (VFM
Proposal of a Novel Gravity-Fed, Particle-Filled Solar Receiver
Hydrodynamic ve Thermal Modelling of Circulating Fluidized Bed Solar Receivers
Numerical Comparison and Sizing Of Sensible ve Latent Thermal Energy Storage For Compressed Air Energy Storage
Proposal and modeling of a novel gravity fed filled absorber solid particle solar receiver
Thermal Analysis of Solar Energy Assisted Cement Production
Stress Distribution Based Partitioning of Helmets for 3 D Printing
Numerical Investigation of Various Approaches to Avoid Natural Convection Instabilities Inside the Channels of Horizontal Plate Fin Heat Sinks
A Comparison of the Common Semi Implicit Time Stepping Schemes in a Spectral Method Navier Stokes Solver ABCN ABBDI2 MABCN and Leap Frog
Simulation of Bubble Motion in Benard Cells by Spectral Methods
3 D Simulation of Convection in Asymmetrically Heated Turbine Blade Cooling Channels
Determination of Assembly Averaged Homogeneous Neutron Cross Sections for MITR II
CFD Analyses of Heat Sinks for CPU Cooling with Fluent
Direct Numerical Simulation of Liquid Flow in a Horizontal Microchannel
A Comparison of AB BDI2 and AB CN Time Stepping Schemes in a Chebychev Tau Spectral Navier Stokes Solver
A Pseudospectral Analysis of Laminar Natural Convection Flow and Heat Transfer Between Two Inclined Parallel Plates
Senior year thermal design course elective or mandatory restricted elective
A Road Map For CFD Modelling Of Forced Cooled Packages
Numerical Investigation on Cooling of Small Form Factor Computer Cases
A Comparison of Common Semi Implicit Time Stepping Schemes in a Pseudo spectral Navier Stokes Solver
Numerical Determination of Critical Tilt Angle for a Parallel Plate Channel
Numerical Investigation of Laminar Microchannel Convective Liquid Flow as a Mixing Enhancer in Microfluidic Devices
CFD Analysis of a Notebook Computer Thermal Management Solution
CFD Modeling and Analysis of a Small Shell and tube Heat Exchanger
A Numerical Investigation of Interactions of Particles with Benard Cells in Horizontal Channels
Modified Laplacians for shape analysis
Components of the Shape Revisited
DİKEY VE EĞİMLİ YÜZEYLERE YERLEŞTİRİLMİŞ DİKDÖRTGEN KESİTLİ KANATÇIKLI ISI ATICILARIN DOĞAL TAŞINIM İÇİN SAYISAL İNCELENMESİ
Numerical and experimental investigation of the thermal behavior of a newly developed attitude Determination Control Unit in a Vacuum environment
Multiphysics Simulations of PEM Electrolyzers
A passive cooling system proposal for multifunction and high power displays
Two Way Coupling of Lagrangian and Eulerian Governing Equations for Particles in Incompressible Fluids
System modeling of a solar hydrogen hybrid renewable energy system in Ankara
Energy and exergy analysis of a solar hydrogen hybrid renewable energy system in Ankara Turkey
Numerical Analysis of Phase Change Material Characteristics in a Thermal Energy Storage Heat Exchanger
Numerical Investigation of thermal management of Solid Oxide Fuel Cells by flow arrangement
Investigation of various options for numerical modeling of fluidized bedsI for a solar thermal application
Numerical investigation of a stand alone solar hydrogen energy system effects of PEFC degradation
Numerical investigation of forced convection thermal management of high power electronics on a rotary platform
Experimental analysis of energy storage device using phase change material integrated with a milk storage system
Projects
Innosolpower, Yenilikçi, Yüksek Güç Yoğunluğuna Sahip Mikro-Termal Güneş Enerjisi Depolama
ECOSun Solar-ERANET Project: Economic COgeneration by Efficiently COncentrated SUNlight
Solar Facilities for the European Research Area - Third Phase
SolarTwins: Solar Twinning to Create Solar Research Twins
Anot Tarafında Çok Düşük Stokiyometrik Akışla Çalışan Polimer Elektrolit Membranlı Yakıt Hücresinin Tasarımı, Üretimi Ve Çalışma Koşullarına Uygun Membran, Elektrot Ve Katalizör Malzemelerin Geliştirilmesi Ve Test Edilmesi
Atık Çamurların Değerlendirilmesi İçin Güneş Enerjili Kurutma Teknolojileri Geliştirilmesi
INSHIP: Integrating National Research Agendas on Solar Heat for Industrial Processes
Pilot Ölçekli Rejeneratif Termal Oksitleme Ünitesi
Isı borusu ag ları yardımıyla do ner tablalar u zerindeki elektronik paketlerden ısı atımı
Katı tanecikli akışkan yataklı yoğunlaştırılmıs güneş enerjisi sistemlerinin sayısal incelenmesi
Hastaneler için Günes Enerji Kaynakli PEM Y P den Elektrik O2 ve H2 Üretim Tesisi Kurulmasi ve Yük
SFF Small Form Factor Bilgisayarların Soğutulmasının Hesaplamalı Akışkanlar Dinamiği ile İncelenmesi
Hastaneler İçin Güneş Enerji Kaynaklı PEM Yakıt Pilinden Elektrik Oksijen ve Hidrojen Üretim Tesisi Kurulması ve Yüksek Basınçlı Elektrolizör Geliştirilmesi
Hastaneler için Günes Enerji Kaynakli PEM Y P den Elektrik O2 H2 Ürt Tesisi Kurulmasi ve PEM Elektr
Kara Hedef Angajmanı için Milimetrik Dalga Radar Teknikleri Geliştirilmesi
Hastaneler İçin Güneş Enerji Kaynaklı PEM Yakıt Pilinden Elektrik Oksijen ve Hidrojen Üretim Tesisi Kurulması ve Yüksek Basınçlı Elektrolizör Geliştirilmesi
Üç Boyutlu Kanal Akışı İçinde Parçacık Hareketlerinin Pralel Algoritma ile Modellenmesi
Memberships
International Centre for Heat and Mass Transfer, Başkan 2019
Courses
| Course Name | Terms | Language |
|---|---|---|
| INTRODUCTION TO SOLAR ENERGGY UTILIZATION | 2019-2020 | İngilizce |
| STEAM GENERATOR AND HEAT EXCHANGER DESIGN | 2015-2020 | İngilizce |
| THERMAL ENGINEERING | 2014-2015, 2016-2019 | İngilizce |
| HEAT TRANSFER | 2016-2018 | İngilizce |
| FUEL CELL FUNDAMENTALS | 2015-2016 | İngilizce |
| STEAM GENERATOR AND HEAT EXCHANGER DESİGN | 2014-2015 | İngilizce |
| Course Name | Terms | Language |
|---|---|---|
| THERMAL RADIATION | 2015-2016, 2017-2019 | İngilizce |
| ADVANCED TOPICS IN RADIATIVE TRANSFER | 2015-2016 | İngilizce |
Managed Theses
| Year | Name Surname | Thesis Title | Üniversite |
|---|---|---|---|
| 2024 | DENİZ DEĞİRMENCİ | Fresnel lens solar collector development considering local conditions | Orta Doğu Teknik Üniversitesi |
| 2023 | TUĞRUL MARAL | Spectral (h-p) element methods approach to the solution of poisson and helmholtz equations using matlab | Orta Doğu Teknik Üniversitesi |
| 2023 | SELİM DİNCER | Radiative heat transfer modeling of cavities with inhomogeneous participating media using monte carlo ray tracing method | Orta Doğu Teknik Üniversitesi |
| 2023 | ONUR POLAT | Solar hybridization paths for cement production processes | Orta Doğu Teknik Üniversitesi |
| 2022 | ENDER ÖZDEN | Detailed design of shell-and-tube heat exchangers using CFD | Orta Doğu Teknik Üniversitesi |
| 2022 | BORA TİMURKUTLUK | Performance anaylsis of an intermediate temperature solid oxide fuel cell | Orta Doğu Teknik Üniversitesi |
| 2021 | EMRE ÖZTÜRK | CFD analyses of heat sinks for CPU cooling with fluent | Orta Doğu Teknik Üniversitesi |
| 2021 | SERKAN KASAPOĞLU | A pseudospectral analysis of laminar natural convection flow and heat transfer between two inclined parallel plates | Orta Doğu Teknik Üniversitesi |
| 2021 | ETHEM ERSÖZ | Development of a racing strategyfor a solar car | Orta Doğu Teknik Üniversitesi |
| 2021 | ZEYNEP UYKUN | Investigation of mechanical and thermal properties of sintered bauxite and sand particles as heat transfer and storage media | Orta Doğu Teknik Üniversitesi |
| 2021 | SİNAN UYGUR | Detailed simulations of parabolic trough collector for investigating enhancement of heat transfer to absorber tube flow | Orta Doğu Teknik Üniversitesi |
| 2020 | SHADI SALEHIAN | Simulation of solar thermal application in a cement plant | Orta Doğu Teknik Üniversitesi |
| 2019 | ESRA POLAT KARADİKEN | Experimental investigation of fluidized bed to be used as solar thermal energy storage | Orta Doğu Teknik Üniversitesi |
| 2019 | YANKI ÇOBANOĞLU | Thermal management of electronics cabinet and effects of different front cover patterns | Orta Doğu Teknik Üniversitesi |
| 2018 | MEHDI MEHRTASH | Numerical investigation of natural convection from inclined plate finned heat sinks | Orta Doğu Teknik Üniversitesi |
| 2018 | CANBERK ÖZTOPRAK | Effects of microchannel manufacturing inaccuracies on heat sink performance: Numerical and experimental investigation | Orta Doğu Teknik Üniversitesi |
| 2017 | EVAN FAİR JOHNSON | Conceptual design and heat transfer investigation of a dense granular flow solar receiver | Orta Doğu Teknik Üniversitesi |
| 2017 | GÖZDE BAŞARA | Mechanical strength of 3D printed objects: Experimental and numerical investigation | Orta Doğu Teknik Üniversitesi |
| 2017 | SERDAR HİÇDURMAZ | Numerical investigation of bubbling fluidized bed to be used as high temperature thermal energy storage | Orta Doğu Teknik Üniversitesi |
| 2016 | MİNE KAYA | Numerical comparison and sizing of sensible and latent thermal energy storage for compressed air energy storage | Orta Doğu Teknik Üniversitesi |
| 2016 | SERHAT BİLYAZ | Numerical investigation of circulating fluidized bed riser hydrodynamics for concentrating solar thermal receiver applications | Orta Doğu Teknik Üniversitesi |
| 2016 | MEHMET ERDEM ÖZET | Improving flow structure and natural convection within fin spacings of plate fin heat sinks | Orta Doğu Teknik Üniversitesi |
| 2016 | ANIL ÇALIŞKAN | Heat dissipation from electronic packages on rotary platforms with the help of heat pipe networks | Orta Doğu Teknik Üniversitesi |
| 2015 | CEM ÖMÜR | YENİ GELİŞTİRİLEN YÖNELİM BELİRLEME KONTROL ÜNİTESİNİN VAKUM ORTAMINDAKİ ISIL DAVRANIŞININ SAYISAL VE DENEYSEL İNCELENMESİ | Orta Doğu Teknik Üniversitesi |
| 2015 | BEKİR ONUR ÇOLPA | CORRELATION BASED THERMAL DESIGN OF AIR TRANSPORT RACK CHASSIS | Orta Doğu Teknik Üniversitesi |
| 2014 | KORAY TAŞTANKAYA | Development of a methodology for sizing and assessment of wind integrated advanced adiabatic compressed air energy storage system (AA-CAES) | Orta Doğu Teknik Üniversitesi |
| 2013 | FIRAT ŞEN | Thermal management of solid oxide fuel cells by flow arrangement | Orta Doğu Teknik Üniversitesi |
| 2012 | CENK EVREN KÜKRER | Direct numerical simulation of liquid flow in a horizontal microchannel | Orta Doğu Teknik Üniversitesi |
| 2012 | ÖMER EMRE ORHAN | Numerical investigation on cooling of small form factor computer cases | Orta Doğu Teknik Üniversitesi |
| 2012 | SİNAN KÜÇÜK | A comparative investigation of heat transfer capacity limits of heat pipes | Orta Doğu Teknik Üniversitesi |
| 2012 | FİDAN SEZA YALÇIN | CFD analysis of a notebook computer thermal management solution | Orta Doğu Teknik Üniversitesi |
| 2012 | KAMİL MERT ÇAKAR | Numerical investigation of natural convection from vertical plate finned heat sinks | Orta Doğu Teknik Üniversitesi |
| 2012 | ARMAN ULUOĞLU | Solar-hydrogen stand-alone power system design and simulations | Orta Doğu Teknik Üniversitesi |
| 2012 | ZAFER ERKAL | Experimental investigation of phase change materials used in prototype military shelters | Orta Doğu Teknik Üniversitesi |
| 2012 | SERCAN ÖZBAY | Thermal analysis of stirling cycle regenerators | Orta Doğu Teknik Üniversitesi |
| Year | Name Surname | Thesis Title | Üniversite |
|---|---|---|---|
| 2021 | ENDER ÖZDEN | PEM fuel cell degradation: Numerical investigation and effects on the performance of solar-hydrogen based renewable energy systems | Orta Doğu Teknik Üniversitesi |
| 2021 | EVAN JOHNSON | Advances in modeling high temperature particle flows in the field of concentrating solar power | Orta Doğu Teknik Üniversitesi |
| 2021 | NİLAY ÇUBUKÇU | Sustainable carbon constrained energy generation perspectives | Orta Doğu Teknik Üniversitesi |
| 2020 | SITKI BERAT ÇELİK | Performance evaluation of linear tube solar receiver as stratified flow vapor generator/separator for absorption machines using NH3/LiNO3 | Orta Doğu Teknik Üniversitesi |
| 2018 | MEHDI MEHRTASH | Numerical modeling and analyses of anisotropic diffusion and stresses in polymer electrolyte fuel cell | Orta Doğu Teknik Üniversitesi |
| 2012 | ÖZGÜR BAYER | Simulation of refrigerated space with radiation | Orta Doğu Teknik Üniversitesi |